Plastic Applications
    >> Devolatilization
    >> Reactive Extrusion
    >> Latex Coagulation Thermoplastics
    >> Hot Melt Adhesive Compounding Extruder
 Rubber Applications
 
     Typical Plastic Applications
 
 
TEM* Series
> Engineering Plastics
> Fibre Compounding
> Filler Compounding
> Color Concentrates
> Polymer Alloy
> Direct Extrusion
> Reactive Extrusion
 
WE Series
> Devolatilization
> Latex Coagulation Thermoplastics
> Reactive Extrusion
> Plastic Recycling
> Hot Melt Formulations
 
HSXII Series
> Sheet and Film Extrusion
> Pipe and Profile Extrusion
> Recycling
> Pelletizing
 
*Manufactured by NFM/Welding Engineers Inc., under license from Toshiba Machine Co., Ltd., Tokyo, Japan
  
NFM Plastic Extrusion Systems
NFM is the industry leader in the design and configuration of singlescrew and twin-screw plastic extrusion
systems. Each system is custom engineered to meet your specific requirements and can be fitted with a
wide variety of specialty items and auxiliary products to handle virtually any extrusion requirement.
 
Through technical expertise and vast experience, NFM offers superior designs which have been
implemented in hundreds of companies throughout the world.
 
 
 
TEM Series
Highest Output Co-Rotating,
Twin-Screw Extruders
 
The TEM* Series co-rotating,
intermeshing twin-screw technology
offers the highest torque-per-free-volume and the highest screw speed available  on the market.
 
Manufactured in North America by NFM, the TEM Series is available in sizes ranging from 26mm to 240mm. The TEM Series offers superior dispersing, distributing and devolatilizing properties.
 
[+] View more info on the TEM Series
 
WE Series Counter-Rotating, Twin-Screw Extruders
 
The WE Series of counter-rotating, non-intermeshing twin-screw extruders has processed virtually every plastic in the world for more than four decades.
 
The unique features of the nonintermeshing design creates the highest free volume and provides the lowest shear available. Additionally, the WE Series can be supplied with the largest feed and vent openings, and longest L/D of any extruder in the market.
 
WE Series extruders are available in a wide variety of sizes ranging from 0.8” laboratory units up to 10”. The WE Series offers a flexible design which can accommodate a wide variety of applications as well as process a broad base of polymers.
 
[+] View more info on the WE Series
  
 
 
 
HSX-II Series Single Screw
Plastic Extrusion

The HSXII Series single screw plastic extrusion systems are available in sizes ranging from 20mm to 250mm.
 
Models include standard production systems, vented extrusion and high output systems. NFM also offers a range of co-extruders which can be specified in carriage mounted, horizontal or pillar mounted design in sizes from 20mm to 45mm.
 
[+] View more info on the HSX-II Series
 
 
 
 
NFM/Welding Engineers, Inc.
577 Oberlin Road SW -
Massillon, Ohio 44647
Corporate TEL: 330.837.3868 
FAX: 330.837.2230
Email:
NFM Southwest USA Office
25325 Borough Park Dr. #105
Woodlands, TX 77380 USA
Phone: 281.681.2500
Fax: 281.681.2501
Email:
NFM IDDON Ltd.
Quin Street - Leyland,
Lancashire England PR5 1TB
Corporate TEL: 44 1772 421258
FAX: 44 1772 431114
Website: www.nfmiddon.co.uk  Email: sales@nfmiddon.co.uk
Copyright © 1998-2007 NFM Welding Engineers, Inc. - All Rights Reserved.